Ceramic Hub Bearing (abec5) #6802
Earn up to Rs. 84.50 cashback with Club House
Description
India's roads, monsoon humidity, and persistent dust are hard on bearings. The Tripeak Ceramic Hub Bearing (ABEC5) #6802 is a precision-grade replacement bearing built for rear hub applications, offering lower rolling resistance and extended service life compared to standard steel bearings — a meaningful upgrade for cyclists in Pune, Chennai, Hyderabad, or anywhere roads punish components year-round. Cobbled Climbs is the authorised retailer for DT Swiss in India.
Use Cases
Daily training. Reliable use across Indian training conditions — heat, humidity, and rough tarmac.
Race day. Performance-grade construction for competitive efforts.
Long rides. Built for full-day rides across Western Ghats, Sahyadri, or Nilgiri climbs.
Our Take
For Indian riders tackling Lonavala climbs or commuting through Bangalore's monsoon-soaked streets, bearing quality is often the most overlooked performance factor. The Tripeak ABEC5 ceramic bearing brings measurably smoother hub rotation and resists the contamination that humidity and grit inflict on standard steel bearings. At Rs. 1,690 with free delivery above Rs. 2,500, this is a cost-effective way to restore or improve drivetrain efficiency without replacing the entire hub.
Sizing for Indian Riders
Bearings are sized by inner diameter, outer diameter, and width — not by rider size. The #6802 designation specifies exact dimensions. Before ordering, remove your existing hub bearing and confirm the stamped code matches #6802. If the code is worn off, measure carefully with calipers. Contact Cobbled Climbs for guidance if unsure — getting the wrong size means the bearing will not seat correctly.
Compatibility Notes
The #6802 bearing is a standard cartridge size used across many rear hubs from brands including DT Swiss and similar manufacturers. It is a sealed, press-fit cartridge — not serviceable, intended for replacement. Installation requires a proper bearing press; do not hammer bearings in. Confirm your hub's bearing spec before ordering.
Pairs Well With
Complete your hub service with compatible bearing grease or assembly fluid, a bearing press tool for correct installation, replacement hub end caps or axle hardware, and a torque wrench for final assembly. Browse all workshop tools and maintenance supplies at Cobbled Climbs.
Explore the full Tripeak collection at Cobbled Climbs
Specifications
| Specification | Detail |
|---|---|
| Brand | DT Swiss |
| Product Type | Cycling Product |
| Shipped From | Mumbai, India |
Explore the full DT Swiss collection at Cobbled Climbs
Why buy from Cobbled Climbs
- 100% genuine — authorised DT Swiss retailer in India
- Free delivery on orders above Rs. 2,500
- Cash on delivery available nationwide
- 7-day easy returns
- Shipped from Mumbai
- Expert advice — built for Indian cycling conditions
Frequently Asked Questions
What is the Tripeak Ceramic Hub Bearing #6802 best used for?
This bearing is specifically designed for rear hub replacement and servicing. If your rear hub feels rough, has play, or has accumulated significant mileage in wet or dusty conditions — common on Indian roads from Ooty to Delhi — replacing the hub bearings with a quality ABEC5 ceramic unit restores smooth rotation and extends the hub's service life considerably.
How do I know if the #6802 bearing is the correct size for my hub?
Check the code stamped directly on your existing bearing before ordering. The #6802 designation refers to a specific set of dimensions — inner diameter, outer diameter, and width. These must match your hub's bearing seat exactly. If the stamp is worn, measure with calipers or consult your hub's service manual. Cobbled Climbs' team can help you confirm compatibility.
Will this ceramic bearing hold up in Indian monsoon and heat conditions?
Yes — ceramic bearings actually perform better than steel in India's challenging conditions. The ceramic ball elements resist moisture-induced corrosion and repel the fine grit that accelerates wear on steel bearings during and after monsoon season. Riders in Chennai, Kolkata, and Mumbai who deal with prolonged wet riding will see a meaningful durability improvement over standard steel hub bearings.
How does a ceramic bearing compare to a standard steel hub bearing?
Ceramic bearings are harder, smoother, and lighter than steel, producing lower rolling resistance at the hub. They also resist corrosion and contamination more effectively. The trade-off is cost — ceramic bearings are priced higher than steel equivalents. For cyclists riding regularly in Indian heat above 35°C or through monsoon conditions, the extended service interval and performance gain make ceramic the practical choice.
Is the Tripeak Ceramic Hub Bearing worth Rs. 1,690 in India, and does it carry a warranty?
At Rs. 1,690, this is an affordable upgrade that can meaningfully extend hub life and improve rolling efficiency — especially in Indian conditions where bearing wear is accelerated. Cobbled Climbs stocks only genuine Tripeak products. For specific warranty terms, contact Cobbled Climbs directly. Free delivery applies on orders above Rs. 2,500, and cash on delivery is available across India.
Why pay full price when loyalty pays back?
Club House rewards you for every purchase — up to 5% cashback, 100 bonus points to start, birthday rewards, and early access to limited drops. It’s our way of saying thanks for riding with us.
Shipping:
We ship all orders within 48 hours, excluding Sundays and public holidays. Delivery typically takes 3 to 5 days depending on your location.
Returns:
If your item arrives damaged, incorrect, or doesn’t fit, you may request a return within 7 days of delivery. Email us at support@cobbledclimbs.com with your order details. Items must be unused and returned in original packaging with all tags and labels intact.
Sale Item Guidelines:
Products purchased on sale are final sale and not eligible for return or exchange. Please double-check sizing, fit, and product details before purchasing.
Please note:
We follow a no money refund policy. Eligible returns are offered store credit or exchange only.
Crash Replacement
Easy Returns
Earn up to Rs. 84.50 cashback with Club House
Ceramic Hub Bearing (abec5) #6802
Earn up to Rs. 84.50 cashback with Club House
Frequently Asked Questions
Does Cobbled Climbs ship Ceramic Hub Bearing (abec5) #6802 across India?
Is the Ceramic Hub Bearing (abec5) #6802 on Cobbled Climbs 100% authentic?
What is the return and exchange policy for Ceramic Hub Bearing (abec5) #6802?
Is Ceramic Hub Bearing (abec5) #6802 currently in stock?
What payment methods are accepted?
Does Ceramic Hub Bearing (abec5) #6802 come with a manufacturer warranty?
How do I find the right size for Ceramic Hub Bearing (abec5) #6802?
Can I get a price match if I find Ceramic Hub Bearing (abec5) #6802 cheaper elsewhere?
What We Reach For
When the ride calls, we don’t think twice. A jersey that’s made to move. A computer that knows the way. A care kit that keeps it all running smooth. These are the pieces we reach for — ride after ride.
