Skip to content

Cart

Your cart is empty

Continue shopping

Ceramic Hub Bearing (abec5) #6903

Sale priceRs. 1,790.00

Earn up to Rs. 89.50 cashback with Club House


Size: 17x30x7mm
Description

India's monsoon rains, dust-laden roads, and summer heat above 35°C are relentless on hub bearings. The Tripeak Ceramic Hub Bearing ABEC5 #6903 is a precision-grade replacement bearing built to restore smooth, low-friction rolling to your rear hub — and to outlast standard steel bearings in conditions that challenge components year-round across Pune, Chennai, Hyderabad, and beyond.

Use Cases

Daily training. Reliable use across Indian training conditions — heat, humidity, and rough tarmac.

Race day. Performance-grade construction for competitive efforts.

Long rides. Built for full-day rides across Western Ghats, Sahyadri, or Nilgiri climbs.

Our Take

If your rear hub has developed roughness or play, a quality bearing swap pays dividends immediately. The Tripeak #6903 in ABEC5 ceramic spec offers tighter dimensional tolerances and a ceramic ball material that resists the corrosive humidity of India's monsoon far better than conventional steel. For riders grinding up the Western Ghats or logging daily kilometres in Chennai's coastal heat, this is a smart, cost-effective upgrade over generic replacements sourced from unknown vendors.

Sizing for Indian Riders

Bearings are sized by inner diameter, outer diameter, and width — not by rider body dimensions. The #6903 designation refers to a specific dimensional standard. Before ordering, remove your existing hub bearing and confirm its markings match #6903. If your hub uses a different number, contact Cobbled Climbs — our mechanics can cross-reference Tripeak's range to identify the correct fit for your wheel.

Compatibility Notes

The #6903 is a hub bearing suited to rear hub applications using that specific bearing standard. It is not a bottom bracket or headset bearing. Verify your hub's bearing spec before purchasing. Installation requires a bearing press for correct, damage-free seating — do not hammer bearings in. All Tripeak products at Cobbled Climbs are 100% genuine and authorised.

Pairs Well With

Round out your hub service with bearing-compatible hub grease or light oil for the freehub, a quality bearing press tool for correct installation, fresh hub axle end caps if worn, and a spoke tension tool if you are truing the wheel during the service.

Explore the full Tripeak collection at Cobbled Climbs

Specifications

Specification Detail
Brand Tripeak
Product Type Cycling Product
Shipped From Mumbai, India

Explore the full Tripeak collection at Cobbled Climbs

Why buy from Cobbled Climbs

  • 100% genuine — authorised Tripeak retailer in India
  • Free delivery on orders above Rs. 2,500
  • Cash on delivery available nationwide
  • 7-day easy returns
  • Shipped from Mumbai
  • Expert advice — built for Indian cycling conditions

Frequently Asked Questions

What is the Tripeak Ceramic Hub Bearing ABEC5 #6903 best used for?

This bearing is designed specifically for rear hub replacement in wheels where the existing #6903-spec bearing has worn, developed roughness, or failed. It suits road, gravel, and MTB riders looking to restore smooth hub rotation and reduce rolling resistance. Particularly useful after monsoon-season riding in cities like Mumbai, Pune, or Kolkata where water ingress accelerates bearing wear.

How do I know if the #6903 is the right bearing size for my hub?

Check the number stamped on your existing bearing — if it reads 6903, this Tripeak unit is a direct dimensional match. The number specifies inner diameter, outer diameter, and width to an industry standard. If the markings are unclear, use calipers to measure the bearing, or contact Cobbled Climbs' mechanics with your hub brand and model for guidance.

Will a ceramic bearing hold up in India's monsoon and 35°C+ heat?

Ceramic bearings actually handle Indian conditions better than standard steel in several ways — ceramic balls do not corrode in humidity and are harder, so they resist the microscopic wear that dust particles cause. The sealed ABEC5 construction keeps contaminants out during monsoon riding. Riders in Chennai, Mumbai, and Goa report noticeably longer service intervals with ceramic over steel bearings.

How does the Tripeak ceramic bearing compare to a standard steel replacement bearing?

Steel bearings are cheaper upfront but corrode faster in humid Indian conditions and have softer balls that wear sooner under grit contamination. The Tripeak ceramic ABEC5 unit offers tighter manufacturing tolerances, lower rolling resistance, better corrosion resistance, and longer service life. For a Rs. 1,790 investment versus frequent cheap replacements, the ceramic unit is more cost-effective over time.

Is the Tripeak Ceramic Hub Bearing #6903 worth Rs. 1,790 in India, and what warranty applies?

At Rs. 1,790, the Tripeak #6903 is competitive for a genuine ABEC5 ceramic bearing — far less than what a hub rebuild at a shop costs if cheap bearings fail repeatedly. For warranty queries, contact Cobbled Climbs directly. All Tripeak products sold through Cobbled Climbs are 100% genuine and sourced through authorised channels, with free delivery on orders above Rs. 2,500.

Details

Brand: Tripeak

Model: Ceramic Hub Bearing ABEC5 #6903

Bearing Type: Ceramic, sealed cartridge

Grade: ABEC5 precision tolerance

Application: Rear hub replacement bearing

Bearing Number: 6903 (standard industry designation)

Construction: Ceramic balls with precision-ground races and sealed shield for contamination resistance

Compatibility: Hubs specifying #6903 bearing standard

Price: Rs. 1,790

Shipped from: Mumbai, India. Free delivery on orders above Rs. 2,500. Cash on delivery available across India.

Specifications

Specification Detail Brand Tripeak Product Type Bearings Shipped From Mumbai, India

Fitting

Bearing sizing is dimensional, not body-size dependent. The number 6903 identifies this bearing's inner diameter, outer diameter, and width to a recognised industry standard. Check the markings printed or stamped on your existing bearing before ordering — if it reads 6903, this Tripeak unit is a direct replacement. If you cannot read the markings, measure the bearing with calipers. Contact Cobbled Climbs if you need help identifying the correct bearing for your specific hub model.

The Story Behind The Brand

Tripeak is a specialist bearing manufacturer focused exclusively on precision cycling bearings — ceramic, hybrid, and steel — for hubs, bottom brackets, and headsets. Known for tight ABEC-grade tolerances and consistent quality, Tripeak products are used by performance cyclists seeking reliable, long-lasting drivetrain components at honest prices.

Loyalty Program

Why pay full price when loyalty pays back?

Club House rewards you for every purchase — up to 5% cashback, 100 bonus points to start, birthday rewards, and early access to limited drops. It’s our way of saying thanks for riding with us.

Shipping + Returns + Refunds

Shipping:
We ship all orders within 48 hours, excluding Sundays and public holidays. Delivery typically takes 3 to 5 days depending on your location.

Returns:
If your item arrives damaged, incorrect, or doesn’t fit, you may request a return within 7 days of delivery. Email us at support@cobbledclimbs.com with your order details. Items must be unused and returned in original packaging with all tags and labels intact.

Sale Item Guidelines:
Products purchased on sale are final sale and not eligible for return or exchange. Please double-check sizing, fit, and product details before purchasing.

Please note:
We follow a no money refund policy. Eligible returns are offered store credit or exchange only.

Crash Replacement

Easy Returns

CERAMIC HUB BEARING (ABEC5) #6903 - Tripeak - Cobbled Climbs
Ceramic Hub Bearing (abec5) #690317x30x7mm Sale priceRs. 1,790.00

Earn up to Rs. 89.50 cashback with Club House

Frequently Asked Questions

Does Cobbled Climbs ship Ceramic Hub Bearing (abec5) #6903 across India?
Yes, Cobbled Climbs ships Ceramic Hub Bearing (abec5) #6903 to all major cities across India including Mumbai, Delhi, Bangalore, Chennai, Pune, Hyderabad, Kolkata, and Ahmedabad. Orders above ₹2,500 qualify for free shipping. Standard delivery takes 3–5 business days. Express delivery is available at checkout for most pin codes.
Is the Ceramic Hub Bearing (abec5) #6903 on Cobbled Climbs 100% authentic?
Yes. Cobbled Climbs is an authorised retailer for Tripeak in India. Every product, including Ceramic Hub Bearing (abec5) #6903, is sourced directly from the brand or their official distributors. All products come with original brand packaging, tags, and warranty documentation.
What is the return and exchange policy for Ceramic Hub Bearing (abec5) #6903?
Cobbled Climbs offers a 30-day return and exchange policy on Ceramic Hub Bearing (abec5) #6903. The item must be unused and returned in its original packaging with all tags attached. To initiate a return, email support@cobbledclimbs.com with your order number. Size exchanges are processed free of charge on the first request.
Is Ceramic Hub Bearing (abec5) #6903 currently in stock?
Yes, this product is currently in stock and available for immediate dispatch.
What payment methods are accepted?
Cobbled Climbs accepts all major payment methods including UPI (GPay, PhonePe, Paytm), credit and debit cards (Visa, Mastercard, RuPay), net banking, and EMI options on select cards. All transactions are secured with SSL encryption.
Does Ceramic Hub Bearing (abec5) #6903 come with a manufacturer warranty?
Ceramic Hub Bearing (abec5) #6903 by Tripeak comes with the manufacturer's standard warranty as specified in the product details on this page. For warranty claims in India, contact Cobbled Climbs at support@cobbledclimbs.com and we will coordinate with Tripeak on your behalf.
How do I find the right size for Ceramic Hub Bearing (abec5) #6903?
Tripeak uses European or international sizing which can run slim compared to Indian sizing. We recommend checking the size chart on this product page and measuring yourself before ordering. If you are between sizes, sizing up is generally recommended for comfort. For sizing assistance, email support@cobbledclimbs.com with your measurements and we will advise.
Can I get a price match if I find Ceramic Hub Bearing (abec5) #6903 cheaper elsewhere?
Cobbled Climbs offers competitive pricing on all products including Ceramic Hub Bearing (abec5) #6903. If you find the same product at a lower price from another authorised Indian retailer, contact us at support@cobbledclimbs.com with the link and we will do our best to match it. Price matching applies only to authorised retailers selling genuine products, not grey market or parallel import listings.