High Precision Steel Hub Bearing (abec3) #6800
Earn up to Rs. 22.50 cashback with Club House
Description
The Tripeak High Precision Steel Hub Bearing (ABEC3) #6800 is a precision-engineered cartridge bearing built for hub service and replacement. At Rs. 450, it offers an accessible entry point into quality bearing maintenance — critical for Indian riders contending with monsoon humidity, fine road dust, and the sustained heat of summer riding across Pune, Chennai, and Hyderabad. Cobbled Climbs is the authorised retailer for DT Swiss in India.
Use Cases
Daily training. Reliable use across Indian training conditions — heat, humidity, and rough tarmac.
Race day. Performance-grade construction for competitive efforts.
Long rides. Built for full-day rides across Western Ghats, Sahyadri, or Nilgiri climbs.
Our Take
India's riding conditions are genuinely hard on bearings. Monsoon water ingress and the fine dust of dry-season roads in cities like Delhi and Ahmedabad accelerate wear faster than European conditions. The Tripeak ABEC3 #6800 is a solid steel cartridge bearing that brings meaningful precision to hub replacement without demanding a large outlay. For riders maintaining DT Swiss, Shimano, or aftermarket hubs, this is a sensible, quality-conscious choice.
Sizing for Indian Riders
Bearings are sized by inner diameter, outer diameter, and width — not by rider body type. The #6800 designation indicates a specific standard size; verify this matches your existing hub bearing before ordering. Cross-reference with your hub manufacturer's service manual or measure the outgoing bearing directly. Contact Cobbled Climbs if you need guidance confirming the correct specification for your wheelset.
Compatibility Notes
The #6800 designation is a standardised bearing size widely used in cycling hubs. Confirm compatibility with your specific hub model before ordering. Installation requires a bearing press — avoid hammer fitting, which causes premature failure. Compatible with many road and mountain hub designs; check your hub's service documentation to confirm the correct bearing specification.
Pairs Well With
For a complete hub service, consider pairing this bearing with quality bicycle-specific bearing grease, a bearing press tool for correct installation, replacement hub seals to keep contamination out, and a spoke tension meter if you're doing a full wheel service at the same time.
Explore the full Tripeak collection at Cobbled Climbs
Specifications
| Specification | Detail |
|---|---|
| Brand | DT Swiss |
| Product Type | Cycling Product |
| Shipped From | Mumbai, India |
Explore the full DT Swiss collection at Cobbled Climbs
Why buy from Cobbled Climbs
- 100% genuine — authorised DT Swiss retailer in India
- Free delivery on orders above Rs. 2,500
- Cash on delivery available nationwide
- 7-day easy returns
- Shipped from Mumbai
- Expert advice — built for Indian cycling conditions
Frequently Asked Questions
What is the Tripeak ABEC3 #6800 bearing best used for?
The Tripeak ABEC3 #6800 is primarily used as a replacement hub bearing for road and mountain bike wheels. It suits riders refreshing worn-out hubs on existing wheelsets rather than buying new wheels. Given India's dusty roads and monsoon exposure, replacing hub bearings at regular service intervals keeps rolling resistance low and extends hub life considerably.
How do I know if the #6800 bearing is the right size for my hub?
The #6800 designation is a standardised bearing size — but not every hub uses this size. Check your hub's service manual, look for a size marking on the outgoing bearing, or measure its inner diameter, outer diameter, and width. If unsure, reach out to Cobbled Climbs with your hub brand and model and our team will confirm the correct specification.
Will this bearing hold up in Indian monsoon conditions and 35°C+ heat?
The sealed cartridge design of the Tripeak ABEC3 #6800 provides meaningful protection against water ingress and fine road dust — both significant concerns during Indian monsoons and dry-season riding in cities like Delhi and Pune. Sealed steel bearings outperform open designs in contaminated conditions, though regular hub checks after sustained wet riding are still advisable to maximise service life.
How does the Tripeak ABEC3 #6800 compare to ceramic hub bearings?
Ceramic bearings offer lower rolling resistance and longer service intervals but cost significantly more. The Tripeak ABEC3 steel bearing at Rs. 450 is an excellent value choice for regular maintenance and commuter or training wheel service. Ceramic options make more sense for race-focused builds; for everyday reliability and straightforward hub servicing, quality steel bearings like this Tripeak unit are the practical choice.
Is the Tripeak ABEC3 #6800 worth Rs. 450, and does it include a warranty?
At Rs. 450, this is strong value for a precision ABEC3-rated cartridge bearing. Quality bearings at this price point meaningfully outlast budget alternatives in Indian conditions. Tripeak is an authorised brand at Cobbled Climbs — all products are 100% genuine. For warranty specifics, contact Cobbled Climbs directly. Free delivery is available on orders above Rs. 2,500, with cash on delivery across India.
Why pay full price when loyalty pays back?
Club House rewards you for every purchase — up to 5% cashback, 100 bonus points to start, birthday rewards, and early access to limited drops. It’s our way of saying thanks for riding with us.
Shipping:
We ship all orders within 48 hours, excluding Sundays and public holidays. Delivery typically takes 3 to 5 days depending on your location.
Returns:
If your item arrives damaged, incorrect, or doesn’t fit, you may request a return within 7 days of delivery. Email us at support@cobbledclimbs.com with your order details. Items must be unused and returned in original packaging with all tags and labels intact.
Sale Item Guidelines:
Products purchased on sale are final sale and not eligible for return or exchange. Please double-check sizing, fit, and product details before purchasing.
Please note:
We follow a no money refund policy. Eligible returns are offered store credit or exchange only.
Crash Replacement
Easy Returns
Earn up to Rs. 22.50 cashback with Club House
High Precision Steel Hub Bearing (abec3) #6800
Earn up to Rs. 22.50 cashback with Club House
Frequently Asked Questions
Does Cobbled Climbs ship High Precision Steel Hub Bearing (abec3) #6800 across India?
Is the High Precision Steel Hub Bearing (abec3) #6800 on Cobbled Climbs 100% authentic?
What is the return and exchange policy for High Precision Steel Hub Bearing (abec3) #6800?
Is High Precision Steel Hub Bearing (abec3) #6800 currently in stock?
What payment methods are accepted?
Does High Precision Steel Hub Bearing (abec3) #6800 come with a manufacturer warranty?
How do I find the right size for High Precision Steel Hub Bearing (abec3) #6800?
Can I get a price match if I find High Precision Steel Hub Bearing (abec3) #6800 cheaper elsewhere?
What We Reach For
When the ride calls, we don’t think twice. A jersey that’s made to move. A computer that knows the way. A care kit that keeps it all running smooth. These are the pieces we reach for — ride after ride.
