High Precision Steel Hub Bearing (abec3) #6803
Earn up to Rs. 19.75 cashback with Club House
Description
India's riding conditions are hard on bearings. Monsoon humidity, dusty roads from Pune to Hyderabad, and the relentless grit of urban streets accelerate wear in even well-maintained hubs. The Tripeak High Precision Steel Hub Bearing (ABEC3) #6803 is a precision-grade replacement bearing designed to restore smooth, low-friction rolling to your hub and extend service intervals in demanding conditions. Cobbled Climbs is the authorised retailer for DT Swiss in India.
Use Cases
Daily training. Reliable use across Indian training conditions — heat, humidity, and rough tarmac.
Race day. Performance-grade construction for competitive efforts.
Long rides. Built for full-day rides across Western Ghats, Sahyadri, or Nilgiri climbs.
Our Take
For riders dealing with noisy, rough-spinning hubs after monsoon season, a quality replacement bearing is the most cost-effective fix available. The Tripeak #6803 brings ABEC3 precision tolerances to a price point that makes proactive maintenance a sensible habit. At Rs. 395, replacing worn hub bearings before they damage races or axles is straightforward logic — particularly for cyclists logging regular kilometres on Indian roads from Chennai to Delhi.
Sizing for Indian Riders
Bearings are sized by inner diameter, outer diameter, and width — not by rider size. The #6803 designation is a standardised bearing code that specifies exact dimensions. Before ordering, confirm your existing hub bearing's code or physically measure the worn bearing. If you are unsure which bearing your hub uses, contact Cobbled Climbs with your hub brand and model for guidance.
Compatibility Notes
The #6803 is a standard bearing size used across many rear hubs from brands including Shimano, DT Swiss, and various aftermarket hubs. Verify your hub's bearing specification before ordering. Proper installation requires a bearing press — avoid hammer installation to prevent damage to races. Steel bearings benefit from quality waterproof grease, especially during monsoon riding. All Tripeak products at Cobbled Climbs are 100% genuine.
Pairs Well With
Complete your hub service with bearing-specific waterproof grease, a quality bearing press tool, and replacement hub seals. If your drivetrain is due a full refresh, consider pairing with new hub end caps or a spoke tension check from a mechanic.
Explore the full Tripeak collection at Cobbled Climbs
Specifications
| Specification | Detail |
|---|---|
| Brand | DT Swiss |
| Product Type | Cycling Product |
| Shipped From | Mumbai, India |
Explore the full DT Swiss collection at Cobbled Climbs
Why buy from Cobbled Climbs
- 100% genuine — authorised DT Swiss retailer in India
- Free delivery on orders above Rs. 2,500
- Cash on delivery available nationwide
- 7-day easy returns
- Shipped from Mumbai
- Expert advice — built for Indian cycling conditions
Frequently Asked Questions
What is the Tripeak #6803 bearing best used for?
The Tripeak #6803 is a precision steel hub bearing designed for rear hub replacement and service. It suits cyclists looking to restore smooth, low-resistance rolling after bearing wear caused by monsoon riding, dusty roads, or high mileage. It is a direct-fit replacement wherever a standard #6803 bearing is specified by the hub manufacturer.
How do I confirm the correct bearing size for my hub?
The #6803 designation is a standardised code specifying exact inner diameter, outer diameter, and width. Check your hub manufacturer's service guide or remove the worn bearing and confirm the code printed on its outer race. If your hub is from brands like Shimano or DT Swiss, you can also contact Cobbled Climbs with your hub model and we will verify compatibility before you order.
Will this bearing hold up in Indian monsoon conditions and 35°C+ heat?
Steel bearings in Indian conditions do require attention — monsoon humidity and road grit are the main enemies. The sealed cartridge design of the Tripeak #6803 offers meaningful protection against water ingress and contamination. Packing the bearing with quality waterproof grease before installation extends service life significantly, particularly for riders in Pune, Chennai, or Kolkata where seasonal rains are intense.
How does the Tripeak #6803 ABEC3 steel bearing compare to ceramic or hybrid alternatives?
ABEC3 steel bearings offer reliable, consistent performance at an accessible price — ideal for regular replacement and maintenance cycles. Ceramic and hybrid bearings offer lower rolling resistance and longer service life but cost considerably more. For daily riders and commuters, steel ABEC3 bearings like the Tripeak #6803 represent practical value; ceramic makes more sense for race-focused riders logging very high annual kilometres.
Is the Tripeak #6803 worth Rs. 395, and does it include a warranty?
At Rs. 395, the Tripeak #6803 is an easy maintenance decision — replacing a worn hub bearing proactively is far cheaper than repairing damaged hub races or axles. All Tripeak products sold at Cobbled Climbs are 100% genuine and authorised. For warranty queries specific to this component, contact Cobbled Climbs directly. Free delivery applies on orders above Rs. 2,500, with cash on delivery available nationwide.
Why pay full price when loyalty pays back?
Club House rewards you for every purchase — up to 5% cashback, 100 bonus points to start, birthday rewards, and early access to limited drops. It’s our way of saying thanks for riding with us.
Shipping:
We ship all orders within 48 hours, excluding Sundays and public holidays. Delivery typically takes 3 to 5 days depending on your location.
Returns:
If your item arrives damaged, incorrect, or doesn’t fit, you may request a return within 7 days of delivery. Email us at support@cobbledclimbs.com with your order details. Items must be unused and returned in original packaging with all tags and labels intact.
Sale Item Guidelines:
Products purchased on sale are final sale and not eligible for return or exchange. Please double-check sizing, fit, and product details before purchasing.
Please note:
We follow a no money refund policy. Eligible returns are offered store credit or exchange only.
Crash Replacement
Easy Returns
Earn up to Rs. 19.75 cashback with Club House
High Precision Steel Hub Bearing (abec3) #6803
Earn up to Rs. 19.75 cashback with Club House
Frequently Asked Questions
Does Cobbled Climbs ship High Precision Steel Hub Bearing (abec3) #6803 across India?
Is the High Precision Steel Hub Bearing (abec3) #6803 on Cobbled Climbs 100% authentic?
What is the return and exchange policy for High Precision Steel Hub Bearing (abec3) #6803?
Is High Precision Steel Hub Bearing (abec3) #6803 currently in stock?
What payment methods are accepted?
Does High Precision Steel Hub Bearing (abec3) #6803 come with a manufacturer warranty?
How do I find the right size for High Precision Steel Hub Bearing (abec3) #6803?
Can I get a price match if I find High Precision Steel Hub Bearing (abec3) #6803 cheaper elsewhere?
What We Reach For
When the ride calls, we don’t think twice. A jersey that’s made to move. A computer that knows the way. A care kit that keeps it all running smooth. These are the pieces we reach for — ride after ride.
