High Precision Steel Hub Bearing (abec5) #6801
Earn up to Rs. 34.25 cashback with Club House
Description
India's riding conditions are hard on bearings. Monsoon moisture, dusty roads from Pune's outskirts to the climbs above Ooty, and the relentless heat of a Delhi or Chennai summer accelerate wear in hubs, headsets, and bottom brackets faster than anywhere in the world. The Tripeak High Precision Steel Hub Bearing (ABEC5) #6801 is a precision-grade cartridge bearing built to meet these demands at an accessible price point.
Use Cases
Daily training. Reliable use across Indian training conditions — heat, humidity, and rough tarmac.
Race day. Performance-grade construction for competitive efforts.
Long rides. Built for full-day rides across Western Ghats, Sahyadri, or Nilgiri climbs.
Our Take
At Rs. 685, this is one of the smartest maintenance spends a cyclist can make. ABEC5-grade precision means tighter tolerances, lower rolling resistance, and longer service life compared to generic replacements. For riders tackling the Western Ghats, grinding through monsoon-soaked Bangalore roads, or commuting daily in Hyderabad's heat, a quality hub bearing is not optional — it is the foundation of a smooth, well-functioning drivetrain. Tripeak's steel construction offers excellent value without compromising on dimensional accuracy.
Sizing for Indian Riders
Bearings are sized by inner diameter, outer diameter, and width — not by rider size. The #6801 designation is an internationally standardised bearing number, so fitment depends entirely on your hub's spec sheet, not your frame size. Before ordering, measure or note the bearing number stamped on your existing bearing. When in doubt, contact Cobbled Climbs and our team can help verify compatibility with your specific hub brand and model.
Compatibility Notes
The #6801 is a standard metric cartridge bearing used in a wide range of road and mountain bike hubs. Verify that your hub manufacturer specifies this bearing number before purchase. Installation requires a proper bearing press — hammer fitting will damage the races and void any performance advantage. Greasing the bore lightly before pressing aids installation and long-term sealing in humid Indian conditions.
Pairs Well With
For a complete hub service, consider pairing these bearings with quality bearing assembly grease, a bearing press and puller tool set, replacement hub end-caps or axle seals where applicable, and a torque wrench for final axle bolt tightening. Browse compatible tools and maintenance products at Cobbled Climbs.
Explore the full Tripeak collection at Cobbled Climbs
Specifications
| Specification | Detail |
|---|---|
| Brand | Tripeak |
| Product Type | Cycling Product |
| Shipped From | Mumbai, India |
Explore the full Tripeak collection at Cobbled Climbs
Why buy from Cobbled Climbs
- 100% genuine — authorised Tripeak retailer in India
- Free delivery on orders above Rs. 2,500
- Cash on delivery available nationwide
- 7-day easy returns
- Shipped from Mumbai
- Expert advice — built for Indian cycling conditions
Frequently Asked Questions
What is the Tripeak ABEC5 #6801 bearing best used for?
This bearing is primarily used as a replacement hub bearing in road and mountain bike wheels that specify the #6801 bearing size. It is well suited to Indian riding conditions — the sealed cartridge design resists dust and monsoon moisture, making it a practical and cost-effective choice for regular maintenance on wheels used in Pune, Chennai, or on the Western Ghats.
How do I know if the #6801 bearing is the right size for my hub?
Check the bearing number stamped on your existing bearing's outer race — if it reads 6801, this is a direct replacement. If the original bearing is too worn to read, consult your hub manufacturer's service guide or contact Cobbled Climbs with your hub brand and model. Our team can verify the correct bearing specification before you order.
Will this bearing hold up in Indian monsoon conditions and high heat?
Yes. The sealed cartridge design resists water ingress and contamination, making it more capable in India's monsoon season than open-race bearings. For riders in high-humidity cities like Kolkata or Chennai, or those riding through seasonal rains on the Coorg descents, regreasing the hub bore during installation adds an extra layer of protection and extends service life.
How does the Tripeak ABEC5 steel bearing compare to ceramic upgrade bearings?
Ceramic bearings offer marginally lower rolling resistance and longer service intervals but cost significantly more. The Tripeak ABEC5 steel bearing at Rs. 685 delivers a meaningful improvement over generic replacements at a fraction of the ceramic price. For most Indian riders focused on regular maintenance rather than race-day marginal gains, the steel ABEC5 is the more practical and better-value choice.
Is the Tripeak ABEC5 #6801 bearing worth Rs. 685, and does it come with a warranty?
At Rs. 685, this is an excellent value precision bearing. ABEC5 grading ensures tighter tolerances than budget replacements, translating to smoother rolling and longer life — particularly important given India's demanding riding conditions. For warranty queries specific to this product, contact Cobbled Climbs directly. All Tripeak products sold through Cobbled Climbs are 100% genuine and authorised.
Why pay full price when loyalty pays back?
Club House rewards you for every purchase — up to 5% cashback, 100 bonus points to start, birthday rewards, and early access to limited drops. It’s our way of saying thanks for riding with us.
Shipping:
We ship all orders within 48 hours, excluding Sundays and public holidays. Delivery typically takes 3 to 5 days depending on your location.
Returns:
If your item arrives damaged, incorrect, or doesn’t fit, you may request a return within 7 days of delivery. Email us at support@cobbledclimbs.com with your order details. Items must be unused and returned in original packaging with all tags and labels intact.
Sale Item Guidelines:
Products purchased on sale are final sale and not eligible for return or exchange. Please double-check sizing, fit, and product details before purchasing.
Please note:
We follow a no money refund policy. Eligible returns are offered store credit or exchange only.
Crash Replacement
Easy Returns
Earn up to Rs. 34.25 cashback with Club House
High Precision Steel Hub Bearing (abec5) #6801
Earn up to Rs. 34.25 cashback with Club House
Frequently Asked Questions
Does Cobbled Climbs ship High Precision Steel Hub Bearing (abec5) #6801 across India?
Is the High Precision Steel Hub Bearing (abec5) #6801 on Cobbled Climbs 100% authentic?
What is the return and exchange policy for High Precision Steel Hub Bearing (abec5) #6801?
Is High Precision Steel Hub Bearing (abec5) #6801 currently in stock?
What payment methods are accepted?
Does High Precision Steel Hub Bearing (abec5) #6801 come with a manufacturer warranty?
How do I find the right size for High Precision Steel Hub Bearing (abec5) #6801?
Can I get a price match if I find High Precision Steel Hub Bearing (abec5) #6801 cheaper elsewhere?
What We Reach For
When the ride calls, we don’t think twice. A jersey that’s made to move. A computer that knows the way. A care kit that keeps it all running smooth. These are the pieces we reach for — ride after ride.
