High Precision Steel Hub Bearing (abec5) #6804
Earn up to Rs. 48.75 cashback with Club House
Description
Bearings are the silent workhorses of any well-maintained bicycle, and in India's demanding mix of monsoon humidity, dust-laden roads, and scorching summer heat, they wear faster than almost anywhere else. The Tripeak High Precision Steel Hub Bearing (ABEC5) #6804 is a precision-grade cartridge bearing built to the ABEC5 tolerance standard, making it a dependable choice for hub servicing across road, gravel, and MTB setups.
Use Cases
Daily training. Reliable use across Indian training conditions — heat, humidity, and rough tarmac.
Race day. Performance-grade construction for competitive efforts.
Long rides. Built for full-day rides across Western Ghats, Sahyadri, or Nilgiri climbs.
Our Take
If you ride through Pune's post-monsoon grit, climb the Western Ghats toward Lonavala, or log daily kilometres on Chennai's humid coast, you know how quickly cheap bearings degrade. The Tripeak #6804 brings ABEC5 precision to a price point that makes routine bearing replacement financially sensible. For riders who actually maintain their bikes rather than wait for catastrophic failure, this is the kind of consumable worth stocking in pairs. Smooth spin, sealed construction, and a trusted bearing manufacturer behind it.
Sizing for Indian Riders
Bearings are not sized to body dimensions — they are sized to your component. The #6804 designation defines this bearing's exact inner diameter, outer diameter, and width. Before ordering, remove your existing hub bearing and confirm the stamped number on its side matches #6804. If you are unsure, contact Cobbled Climbs with your hub brand and model and our team will verify compatibility for you.
Compatibility Notes
The #6804 is a standard metric cartridge bearing used in a wide range of bicycle hubs across road and MTB categories. It is compatible with many hubs from brands stocked at Cobbled Climbs including DT Swiss and others using this bearing dimension. Always confirm the bearing number stamped on your current bearing before purchasing. Use a proper bearing press for installation — never hammer bearings into place. Grease the bearing seat lightly before fitting.
Pairs Well With
Complete your hub service with quality bicycle-specific bearing grease for seating and protection, a bearing press tool for clean installation without damage, replacement hub seals or dust covers where applicable, and a torque wrench to properly secure axle end caps and locknuts after reassembly.
Explore the full Tripeak collection at Cobbled Climbs
Specifications
| Specification | Detail |
|---|---|
| Brand | Tripeak |
| Product Type | Cycling Product |
| Shipped From | Mumbai, India |
Explore the full Tripeak collection at Cobbled Climbs
Why buy from Cobbled Climbs
- 100% genuine — authorised Tripeak retailer in India
- Free delivery on orders above Rs. 2,500
- Cash on delivery available nationwide
- 7-day easy returns
- Shipped from Mumbai
- Expert advice — built for Indian cycling conditions
Frequently Asked Questions
What is the Tripeak #6804 bearing best used for?
The Tripeak #6804 is a hub bearing replacement designed for road, gravel, and mountain bike hubs that use this specific bearing size. It is ideal for routine maintenance, particularly after monsoon season when water and grit accelerate bearing wear. Riders in high-mileage cities like Hyderabad, Delhi, or Pune will find regular bearing replacement keeps hubs spinning freely and prevents hub body damage.
How do I know if the #6804 is the right bearing size for my hub?
Check the number stamped on your existing bearing — if it reads 6804, this Tripeak unit is a direct replacement. The 6804 designation defines precise inner diameter, outer diameter, and width. Different hubs use different bearing numbers, so do not guess. If you cannot read the stamp, contact Cobbled Climbs with your hub brand and model and our team will confirm compatibility before you order.
Will this bearing hold up in Indian monsoon conditions and 35°C+ heat?
The sealed cartridge design of the Tripeak #6804 provides meaningful protection against the water ingress and fine grit that characterise Indian monsoon riding. The ABEC5 tolerance grade ensures tight manufacturing precision, which reduces internal play and slows contamination wear. In extreme heat above 35°C, sealed bearings outperform open cup-and-cone designs because they retain grease more effectively under thermal stress.
How does the Tripeak #6804 steel bearing compare to ceramic hub bearings?
Ceramic bearings offer marginally lower rolling resistance and longer service life, but cost significantly more per unit. For most Indian cyclists — commuters, weekend club riders, or gran fondo enthusiasts — a quality ABEC5 steel bearing like the Tripeak #6804 delivers excellent performance at a fraction of the cost. Ceramic makes more sense for racers or those doing very high annual kilometres on premium wheelsets.
Is the Tripeak #6804 worth Rs. 975, and does it include any warranty?
At Rs. 975, the Tripeak #6804 represents genuine value for a precision ABEC5 bearing — cheap bearings cost less upfront but damage hub shells when they fail. For warranty queries specific to this product, contact Cobbled Climbs directly. All Tripeak products sold through Cobbled Climbs are 100% genuine and authorised. Free delivery applies on orders above Rs. 2,500, and cash on delivery is available nationwide.
Why pay full price when loyalty pays back?
Club House rewards you for every purchase — up to 5% cashback, 100 bonus points to start, birthday rewards, and early access to limited drops. It’s our way of saying thanks for riding with us.
Shipping:
We ship all orders within 48 hours, excluding Sundays and public holidays. Delivery typically takes 3 to 5 days depending on your location.
Returns:
If your item arrives damaged, incorrect, or doesn’t fit, you may request a return within 7 days of delivery. Email us at support@cobbledclimbs.com with your order details. Items must be unused and returned in original packaging with all tags and labels intact.
Sale Item Guidelines:
Products purchased on sale are final sale and not eligible for return or exchange. Please double-check sizing, fit, and product details before purchasing.
Please note:
We follow a no money refund policy. Eligible returns are offered store credit or exchange only.
Crash Replacement
Easy Returns
Earn up to Rs. 48.75 cashback with Club House
High Precision Steel Hub Bearing (abec5) #6804
Earn up to Rs. 48.75 cashback with Club House
Frequently Asked Questions
Does Cobbled Climbs ship High Precision Steel Hub Bearing (abec5) #6804 across India?
Is the High Precision Steel Hub Bearing (abec5) #6804 on Cobbled Climbs 100% authentic?
What is the return and exchange policy for High Precision Steel Hub Bearing (abec5) #6804?
Is High Precision Steel Hub Bearing (abec5) #6804 currently in stock?
What payment methods are accepted?
Does High Precision Steel Hub Bearing (abec5) #6804 come with a manufacturer warranty?
How do I find the right size for High Precision Steel Hub Bearing (abec5) #6804?
Can I get a price match if I find High Precision Steel Hub Bearing (abec5) #6804 cheaper elsewhere?
What We Reach For
When the ride calls, we don’t think twice. A jersey that’s made to move. A computer that knows the way. A care kit that keeps it all running smooth. These are the pieces we reach for — ride after ride.
